 | ||
 | | |
|  | ||||||||||
 | |||||||||||
HOME • NEWS & RESULTS • ASA NEWS • SCHEDULE • STANDINGS • PHOTOS • RECORDS | |||||||||||
| |||||||||||
 | |||||||||||
Madison International Speedway | |||||||||||
 | |||||||||||
| | | | | | | | | | | |
MIS has REDUCED Adult Admissions for regular events to $9.00 | ||||
| | | | |
Attention Area Sportsman Drivers Please note the rule revision regarding body rules for the Area Sportsman division. REVISED BODY RULES FOR SPORTSMAN DIVISION MAY 13, 2009 BODY AND APPEARANCE--All cars must remain stock appearing with complete fenders, quarter panels, doors, roof, hood and trunk lid. Stock steel roof required. Stock steel or professionally built metal bodies required. Plastic or fiberglass fenders, doors, or rear quarters not allowed. Headlight moldings and stock appearing grill required. No fiberglass nosepieces allowed. Approved aftermarket plastic nosepieces required from the following list: 1988 Monte Carlo, 1988 Thunderbird, 1997 Regal, 1997 Cutlass, and 1994 Lumina. No other nosepieces allowed without prior permission. Ground clearance at nosepiece will be 5 1/2" minimum (with driver). All aftermarket nose pieces must match make (GM on GM, Ford on Ford) of body. Stock hood must have reinforcements removed. Fiberglass hood allowed (no light weight). No multi-plane spoilers. Maximum spoiler height 5" for cars without rear window, 3" for cars with rear window. Maximum spoiler width 60". Spoiler may not extend outside body by more than 1". No forward facing air scoops or holes (except for pins) in hood allowed. Filler panels painted with reflective colors required. Bumper ends must be capped and not extend past body. Stock or Lexan windshields required, all other windows (if used) must be of Lexan. Sunroofs must be closed in with sheet metal. Body must be within 2" from outside of tires. | ||
| | |
© Copyright 2007-09 Madison International Speedway - All Rights Reserved | ||
| | |
| ||
| | |
